Abrasive Nylon Scotch Hand Pads

Abrasive Nylon Scotch Hand Pads

£8.07£25.92 incl VAT

Hand Pads (229 x 152mm). Per 10. Abrasive Nylon Hand Pads measure 229 x 152mm and are manufacture here in our factory. A scotchbrite style material hand pad.

HDVCA – The most aggressive abrasive nylon material.
HDCA – A very heavy duty abrasive nylon material for the severest conditions – Scale removal and sateen finishing on stainless steel.

Superior Brown – A very heavy duty cloth but leave a very clean bright medium grade finish. Longer lasting material, equivalent to 3M 7440

Black Super Cut – Silicone carbide abrasive with a sharper cut that leaves a bright finish to match pre-blended steel.
HDMA – Heavy duty abrasive nylon material for severe conditions, but a finer finish than HDCA.
CA – A general purpose 80 grit abrasive nylon material.
MA – A general purpose 180 grit abrasive nylon material.
FA – A general purpose 280 grit abrasive nylon material.

GREEN – A non-abrasive material for light deburring and cleaning operations.

UFS – The finest grade using Silicone Carbide. For an even, consistent finish

Grade
Choose an option

£8.07£25.92 incl VAT

Add to cart
Buy Now

Scotch Hand Pads

Abrasive nylon scotch hand pads are used to give a satin/sateen finish most commonly on metal.

Depending on the grade selected, different finishes can be achieved.

The pads are simple to use on their own and can be cut to size with scissors.

The hand pads are impregnated throughout with grit, therefore they work on their own without the need for compound.

These hand pads are useful for fabrication, home improvement, antique restoration, jewellery finishing.

Sold in packs of 10 (229 x 152mm)

For Jewellers

Abrasive handpads are very handy to have around the workshop. They can be used for cleaning after soldering or for applying satin finishes by hand.

You can even cut up pads into small squares to supply to your customer to maintain a satin finish at home.

Other Uses

Heavy duty grades are suited to harder metals such as Steel and Titanium because they are harder wearing and will last longer. Can be useful for restoring steel tools and finishing hard metal jewellery.

The finer grits such as CA, Green and UFS work well on Aluminium, brass etc or where less work needs to be done and a perhaps a simple clean is necessary.

 

An even more economical option would be our Abrasive Nylon Cleaning and Finishing Rolls 150mm x 10m Rolls.

 

Weight 2 kg
Grade

HDVCA, Superior Brown, Black Super Cut, HDMA, CA, MA, FA, Green, UFS