* Better Surface Contact<\/strong> * Larger Crystals<\/strong> * Less Loading<\/strong> * Reduced Friction<\/strong> * Longer Life<\/strong> Can use wet or dry. Using wet will prolong life and flush out metal waste, keeping Micro-Mesh\u00ae cleaner. Best results will be achieved when using Micro-Mesh\u00ae with light pressure and\/or at low rotational speeds.<\/p>\n Micromesh works a bit differently from standard abrasives, use this chart to choose the grit you require by comparing to standard FEPA grits.<\/p>\n MX sheet is particularly useful for surgical instruments, engine components, mould and dies, knives, shears etc. Sheets are useful for turning into your own tools, it can be stuck onto basic tools to be used as a files, fixed flat to a bench or simply used by hand.<\/p>\n
\nThe crystals in the conventional abrasives are locked at irregular heights and at random angles. Many never touch the working surface. The Micro-Mesh\u00ae system allows the crystals to move \u2013 depressing to seek a common level \u2013 while rotating their planing chips into alignment. This creates a smooth shaving action rather than gouging and abrading the surface \u2013 an ultrafine scratch pattern results.<\/p>\n
\nThe unique \u2018Floating Suspension\u2019 of Micro-Mesh\u00ae crystals allow us to use relatively large grit to produce super finishes. Micro-Mesh\u00ae removes the peaks of the previous scratch pattern without gouging deeper channels.<\/p>\n
\nUsing larger crystals leaves a large valley between crystals relative to the very fine particles removed. These fine particles will fall free of the crystals and clear of the freshly worked
\nsurface.<\/p>\n
\nMuch of the heat generated during conventional sanding comes from abraded particles loading the abrasive. This heat can
\nactually weld the abraded particles back onto the workpiece, creating a false surface. At some future time these particles may come loose, causing part failure. With Micro-Mesh\u00ae high heating and welding just can\u2019t occur, assuring surface integrity.<\/p>\n
\nBy avoiding the heat producing friction that can fracture and destroy crystals, Micro-Mesh keeps its superior properties longer \u2013 up to 15 time longer \u2013 than ordinary abrasives.<\/p>\nMicromesh Grits<\/h2>\n
![\"micromesh](\"http:\/\/moleroda.com\/new\/wp-content\/uploads\/2015\/12\/micromeshgrits_S.jpg\")
<\/p>\nFor Engineers<\/h2>\n
For Jewellers<\/h2>\n